br24d crystal can welded ? dpdt dry circuit to 10 amps dc suppressed coils specifications general contact arrangement .......................... 2pdt (2 form c) weight ................................ .......................... 1.0 oz approx. designed to meet the requirements of mil - prf - 39016. performance contact rating (not e 1): resistive ............. 10 amps @ 28 vdc or 115v 400 hz (case ungrounded) inductive ................................ ....... 3.5 amps @ 28 vdc life ................................ ... 100,000 operations minimum @ rated load, 125 o c pull in power ................................ ............ 400 mw approx. operate/release time .................... 7 ms max, excluding bounce time at nom inal coil voltage contact bounce time ................................ ....... 2 ms max @ 10 amps 28 vdc contact voltage drop : before life ....................... 100 mv max @ rated current 6 or 28 vdc after life .......................... 200 mv max @ rated current 6 or 28 vdc environmental temperature range ............................... - 65 o c to +125 o c vibrati on (note 2) ................................ 0.4" da 10 - 31 hz 20 g's 31 - 2,000 hz shock (operating) (note 2) ........................ 50 g's 11 ms electrical characteristics duty cycle ................................ ........................ continuous insulation resistance 10,000 megohms @ 500v 25 o c 1,000 megohms @ 500v 125 o c dielectric strength: sea level: contact to case ................................ ... 1,250 vrms contact to coil ................................ ..... 1,250 vrms coil to case ................................ ......... 1,000 vrms across open contacts ........................ 1,250 vrms 70,000 feet: all points ................................ ................. 500 vrms notes: 1. for case grounded loads and other ratings, consult the factory. 2. for applications requirin g other shock and vibration levels, consult the factory. 3. for other ratings consult the factory. 4. relay contacts which have switched high level currents are no longer suitable for switching low level loads. 14930 e. alondra blvd. , la mirada, ca 90638 - 5752 (714) 994 - 6500 fax (714) 994 - 3013 w:2000, rev. 2
relay type nominal coil resistance terminal style mounting type nominal coil voltage br24d - 400 a 1 - 26v br24d coil data: model br24d part number br24d - 85()() - 12v br24d - 300()() - 26v br24d - 400()() - 26v nominal coil voltage 1 2 vdc 26 vdc 26 vdc maximum coil voltage 14.8 vdc 32 vdc 32 vdc pull in voltage (max @ +125 o c) 8.3 vdc 18 vdc 18 vdc pull in voltage (max) 6.4 vdc 14 vdc 14 vdc drop out voltage (min) 0.6 vdc 1.3 vdc 1.3 vdc coil resistance 10% @ 25 o c 85 ohms 300 ohms 400 ohms schematic terminal views terminal styles mounting codes general notes ? unless otherwise specified, all tests made at nominal coil voltages, @ 25 o c. ? for special coil variations, switching configurations, terminals styles and mounting types, consult the factory. ? unless otherwise specified, tolerances on decimal dimensions are .010". ? specifications contained herein are subject to change without notice. 14930 e. alondra blvd., la mirada, ca 90638 - 5752 (714) 994 - 6500 fax (714) 994 - 3013 w:2000, rev. 2
|
